Ball Valve Manufacturers

1 With 23 years of production experience, capable of selecting models for various working conditions
2 The max. diameter is DN1000 (NPS 40)
3 The Max. pressure can reach 2500LB (PN420)
4 A research and development team with 40+ senior engineers and technical personnel

Ball Valve is a new type of valve produced in the 1950s. After years of continuous use, improvement and breakthrough, the ball valve can withstand various pressures and corrosion. Ball valves are more and more applicable.

They have zero leakage and can control high pressure and high fluid volume. The ball valve of Lixin has a variety of designs, which helps to reduce the number of valves required by the pipeline, thus minimizing the extra cost.

Lixin ball valves advantage:

1.With 23 years of production experience, capable of selecting models for various working conditions

2.The max. diameter is DN1000 (NPS 40)

3.The Max. pressure can reach 2500LB (PN420)

4.A research and development team with 40+ senior engineers and technical personnel

The chief Features:

Full port,floating or trunnion mounted type

Bolted bonnet

Blowout proof stem

Structure improve on API

Opening and closing position

Avaliable with worm gear operator

Frequently asked questions

QAdvantages of Double Gate Discharging Valve ?

After the valve is closed, it is fully sealed in any direction. The valve body and bonnet are welded with WCB steel castings and seamless steel pipes. The packing material is a hard seal, which has good sealing performance, strong wear resistance, small starting load, less ash sticking and fouling, and long service life.

QCan lifting plug valves be used for particulate media?

Yes,it can be used for particulate media,but not suitable for large particles

QCan the ball valve have a lock structure?

Yes, for the valves installed outdoor,those preventing improper operation of non-workers and valves,of which collision of its stem in relatively violent vibration occasions easily causes improper operation,a locking bore can be set in the fully open position or fully closed position and a lock can be used if needed,for the purpose of security insurance.

QCan the ball valve have an anti-static structure?

Yes, according to the customer's requirements, the ball valve can be designed as an anti-static structure, namely, mounting conductive spring between the globe body and stem,or between the stem and body.There after the static engendered during opening the valve could be conducted to pipelines then earth through the pre-set static passage to clear static away.The design works to prevent igniting combustible medium by static fire-striking for the system safety.

QCan the plug valve be 3-way or 4-way?

Yes, according to different conditions,the 3-way,4-way plug valve can be design into diversification media flowing forms(eg. L-type and T-type).

Is it difficult for you to choose which valve? Please send us your questions and we will give you a detailed plan.

Question

GET A QUOTE